How to set up and use a headset on Windows 10

How to set up your headset on Windows 10

To use a headset, you’re going to have to plug it in. Simple, we know, but it’s easy to get this step wrong if you’re not familiar with available ports for audio on a PC. This can be achieved by hooking up the cable’s end on the headset to an available port on a PC or connecting it via wireless. Here are the options for headset owners:

  • 3.5mm jack: Older and more affordable headsets usually have the cable split at the end with two 3.5mm jacks, one for audio out and the other for the microphone. (Pink for the microphone, green for the headset.)
  • USB: USB-powered headsets offer enhanced experiences thanks to inline amps, controls, and other features, though, in terms of quality, there isn’t a huge gap between USB and 3.5mm jacks.
  • Wireless: Whether it be Bluetooth or requires a dedicated USB wireless receiver, these headsets remove all cables between and your computer, allowing you to sit more comfortably without fear of creating a tangled mess.

Depending on the case and motherboard installed on a desktop PC, there may be available ports on or near the front of the chassis, which could prove useful if you have a short cable or have no free ports on the rear. The most important factor in sound quality will be the soundcard on your motherboard, comparing it against a dedicated digital-to-analog converter (DAC).

Checking sound output in Windows 10

Once you have the headset connected to the PC, it’s time to make sure Windows has sound levels and the like set up and configured correctly. Firstly, we need to check Windows has the headset selected as the default output device.

  1. Left-click the sound icon in the taskbar.
  2. Select the sound device in the drop-down menu. Source: Windows Central
  3. Choose the connected headset.

This could have in brackets either USB or the brand and model of the onboard motherboard audio — it depends on which connection type the headset utilizes. It’s possible to rename each entry on this list to make it easier for you to decipher which is which. (See below how to rename a connected sound output.)

Now we’ll need to test the output to make sure we’ve selected the correct device, and everything is working perfectly. You can do this by firing up some media on the PC or utilize the test function in Windows.

  1. Right-click the sound icon in the taskbar.
  2. Select Open sound settings.
  3. Choose Sound control panel on the right.
  4. Select the headphones (should have a green tick). Source: Windows Central
  5. Hit Properties. (You can rename this sound output right here to make it easier at switching.)
  6. Select the Advanced tab.
  7. Hit the test button.

If you hear sound through the headphones, you’re good to go. If not, check if you have the correct device selected for sound output and that the headset itself is plugged in (we’ve all be in the position where something doesn’t work because it isn’t physically connected).

Recording your own voice

After that, we need to select the microphone as the default input device and make sure the volume is turned up. To do this, we run through similar steps carried out for the headphones.

  1. Right-click the sound icon in the taskbar.
  2. Select Open sound settings.
  3. Choose Sound control panel on the right.
  4. Select the Recording tab.
  5. Choose the microphone. Source: Windows Central
  6. Hit Set as default.
  7. Open the Properties window. Source: Windows Central
  8. Select the Levels tab.
  9. Adjust the volume accordingly.

Be sure to fire up your favorite VoIP app (Discord is a great option) or recording software to test the microphone out. Some applications can take full control of the microphone and adjust levels accordingly. In contrast, others allow you to manipulate the software suite’s volume to save you from opening this recording window each and every time.

www.000webhost.com